SLOSH Report

The SLOSH REPORT show the potential inundation levels (ft ASL) for specific locations. It can be run in both MOM and MEOW mode. The only difference is that while in MEOW mode, the report will only include locations “within” the currently selected basin’s area. The report above is an example of a report for some location in the Tampa Bay area.

In order to create a Slosh Report, the user must do the following steps. 

1. From System Setup, location maintenance, define a SLOSH location group associating it to a SLOSH basin.
2. Associate specific locations to this location group via location group maintenance.
3. If desired, specify the elevation for the locations added to the location group via location maintenance. Otherwise the location elevations will be estimated using the supplied elevation database. If known, we recommend you enter the actual elevation of the location.
4. From SloshView, select Slosh Report menu item and select the desired location group. 

OR 

From SloshView, select SLOSH report for any location group. Make sure that the location in this group have been accurately defined for location and elevation.

You can send, print, copy or Export this report to Google Earth.

In MOM mode, locations without designated SLOSH basins will be assigned one by the system based on distance (i.e. the system will pick the closest one). Caution must be exercised when viewing the results of this data as the SLOSH analysis errors increase as the locations distance from the SLOSH basin “center” increases.